Welcome to the Torque Motor Group


back

Challenge Camper Trailers
"Designed by Campers for Campers"

Camper Trailers
Off and on road - manufacture, sales & hire

Trailer Manufacture
All styles - custom builds our specialty

Tent Manufacture
Awnings - made to measure

Note: These are the Standard features of all models. For additional Deluxe/Meridian features please contact the Torque Motor Group.

Heavy duty RHS Chassis and long drawbar (fully galvanised)
Chequer plate floor with quality made guards to suit 14" - 16" wheels
Side steps
Swivel Jockey Wheel
*Outback - Heavy duty 45mm square axle/60mm wide eye-to-eye 7 leaf springs
rebound type - 6 stud hubs
*Highway - Heavy duty 40mm square axle/45mm wide eye-to-eye 6 leaf springs
rebound type - 5 stud hubs
All metal primed with 2 coats
Size: 7' x 4' x 20" deep
50mm ball coupling
Front mounted spare wheel
Rear swing gate - fully water and dust proof with Challenge Compression Camlock
3 x Jerry Can holders with steel tie-down loops
1 x 4.5kg LPG gas bottle holder
Outback - Three 15" x 7" Sunraysia rims and secondhand tyres (New on Deluxe and
Meridian Packages)
Highway - Three 15" x 6" Commodore rims and secondhand tyres (New on Deluxe
Package)
Stabilizer legs (Spring loaded/zinc plated)
Weight:(Trailer Only) *Outback - Steel construction - approx. 490 kg
(Trailer Only) *Outback - Alloy construction - approx. 270 kg
(Trailer Only) *Meridian - Approx. 550 kg
(Trailer Only) *Highway - Approx. 410 kg
Colours: 7 to choose from (Colour matching available at additional cost)
Trailer fully lockable with lock provisions
Paint hardener additive
Full trailer lights including 7 pin round plug
Your camper is erected in minutes with a minimum of effort

Trailer Options
Treg Polyblock trailer coupling
Treg Polyblock vehicle coupling
Hydraulic override brakes
Electric brakes
Electric Handbrake assembly
Electric Brake Controller
Trailer wired for in-car charging
Trailer wired with 50 amp Anderson Plug
Fully galvanised drawbar
Toolbox at front of Trailer incl. seals/latches
Vertically mounted front spare wheel/bracket and stand
86 litre water tank under rear of body
Second 70 litre water tank under body with stone guard and all plumbing
Slide access hatch R.H.F. (access from outside tent) as above
Gas strutted lifting bed base
Increased provision for up to 7 jerry cans
Extended reinforced D/bar 300mm
Alko independent suspension
Provision for bike rack (rear) (30kg cap.)
80Amp/hr dry cell battery add.
100 Amp/hr dry cell battery add.
120 Amp/hr dry cell battery add.
L.P.G. gas bottle 4.5kg (POL fitting)
L.P.G. gas bottle holder on R.H.R. plate
Pyramid matting stone protection
Underbody rubber protection
Jerry can protection
"Rhino" rubber protection guards/wings
Aluminium checkplate guards and A-frame
16" Wheel rims
17" Wheel rims
New Tyres - full range 14" - 17 "
Boat rack (Standard tradesman)
Boat rack (Deluxe gas strut - 180")
Outboard motor bracket (spare wheel area)
Stoneguard (Heavy duty truck mesh)
Marine carpet to floor of trailer
Marine carpet to walls of trailer
Zinc annealed body
Galvanized main frame chassis
Spare spring and bearing set (mounted)
Automotive Two Pack urethane paint
Drawer system to RHF access hatch
Spare wheel hub mounted on spare wheel
Spare wheel mounted underside rear trailer (relocate 86lt water tank to front underside)
Shock absorbers mounted to beam axle and leaf springs
Pneumatic Jockey wheel 8"
Tent Features (standard on all models)
10 foot tent off side of trailer (Outback and Highway) 12 foot tent off side of trailer (Meridian)
"Wax Converters" Dynaproofed canvas (11oz Walls/15oz Roof)
All tents have steel framework with bows held in position with reinforced pockets and retainers
3 internal opening windows at bed level with "Tentex" screens
1 external opening window in end tent wall cut to tent floor level with "Tentex" screens
(external flaps can be used as awnings)
2 x Zippered canvas doors on opposite side walls of tent with zippered "Tentex" screen
Reinforced 4" high PVC welded floor
Queen sized bed on steel bed base including new 6" high density covered foam mattress
(innerspring mattress on "Outback Deluxe" and "Meridian") - hatches under Bed to gain access to trailer storage
Step provided to access bed
Zippered security pocket for personal items
All poles, pegs and guy ropes supplied in separate bag
Tent area 2.2m x 2.7m plus area housing Queen sized bed
Bed base and tent detachable from trailer if required

Tent Options (Available all models)
Zippered vinyl cover for tent
6 ft awning roof only (10 ft tent)
7 ft awning roof only (10 ft tent)
8 ft awning roof only (10 ft tent)
Upgrade from 6 ft awning to 7 ft available
Upgrade from 6 ft awning to 8 ft available
Upgrade from 10 ft tent to 12 ft available
Upgrade from 10 ft tent to 14 ft 6 inches available
Annexe wall to apex return around kitchen with window and draught curtain (10 ft)
Single canvas slide wall to awning
Mesh walls apex to end awning (10 ft)
Canvas walls apex to end awning (10 ft tent) including 2 windows
Complete annexe walls (10 ft tent) in canvas including 4 windows
Annexe walls/screens - full or partial custom made to your requirements
Marie washable carpet to floor of tent and/or annexe
Second Queen size foam mattress (sits on top of mattress in trailer)
Additional PVC overlays for main tent windows
4 x poles/guy ropes/pegs for awning windows

Base model kitchen package (Standard Packages)
*Features as listed on Outback and Highway Standard Packages

Standard kitchen package (Highway Deluxe packages)
Powder-coated steel kitchen attached to tailgate
2 burner steel gas stove
Plastic wash basin with hand water pump
Fold-down preparation tray
Utensil tray
Windguard and covers used as preparation areas
Marine carpet to floor of kitchen storage area
4.5kg gas bottle/fire extinguisher
Twin gas regulators
Complete gas lines with quick-connect coupling
2nd hand water pump - external

Deluxe Kitchen Package (Outback Deluxe and Meridian Packages)
*Features as listed for Standard Kitchen with the following upgrades:-
"Lido Junior" stainless steel 2 burner stove with griller
Stainless steel sink
Stainless steel braided pigtail

Standard Electrical Lighting Package (Deluxe Packages)
N70ZZ Heavy duty 90 amp/hr battery w/- terminals
Marine battery box (plastic)
Trailer fully wired with 2 x 12 volt outlet sockets
Internal light to cargo bay of trailer
Tent light - Fluro with 3m cable
Outside light to kitchen - Fluro with mounting clips
Fuse box (4 terminal)
Voltmeter (to show L.E.D. battery charge status)
Trailer Plug wired for in-transit trailer battery charging
Battery charger 240v-12v for charging main battery with L.E.D. display
All wiring fully insulated

Hi-Tech Electrical Lighting Package (Meridian Package)
*See features as listed for Meridian Package